James Alpe Repair Centre choose our Spray Booth Equipment

Lancashire based Accident Repair Centre James Alpe have recently installed a four-bay Junair MultiBooth.

With over 30 years experience, James Alpe are in a prime position to understand the ever-changing requirements of its customers. James Alpe approached Junair for a solution to their customers’ requirements, and the MultiBooth was the obvious option. Key to key time, quality and cost always feature highly in customer demands and now with the new MultiBooth from Junair, James Alpe are able to deliver on all of these requirements.

Key to Key time

The MultiBooth saves time by eliminating the need for moving the vehicles around the bodyshop. The vehicles are prepared, sprayed and baked in situ, with no movement required. The damaged vehicle is driven into the cabin and the refinished vehicle is driven out. It doesn’t matter in which order the vehicles become ready for the paint process, the easy glide door simply slides along to convert the relevant cabin into a fully operational low bake spraybooth oven.

Quality

As the MultiBooth is a fully extracted spraybooth oven, the quality of the finish is the same you would expect from any other Junair spraybooth. As with all Junair products, the MultiBooth complies with all relevant HSE regulations. As MultiBooth is a conventional spraybooth oven, all compliant paint types can be used, so no compromise on paint systems is required.

Costs

The MultiBooth shares one air handling plant across all its cabins, meaning that the initial capital outlay is significantly less than you would expect. In addition to that, the speed of the process sees a higher throughput of vehicles in the workshop meaning that costs can be kept to a minimum. The booth runs with the energy efficiency that is synonymous with the Junair name, meaning the bodyshop energy bills are also kept as low as possible.

James Alpe commented, “We have been operating an express repair service for our insurance work providers and private clients for a number of years. This function was run by a dedicated team of four technicians. With the new MultiBooth, the same four operatives are now able to work far more efficiently and with a much faster turnaround time, further enhancing our express 24 hour repair facility.

Each MultiBooth cabin is a combination preparation area and a full low bake spraybooth, allowing multiple vehicles to be repaired in a clean controlled and safe environment. Overspray is contained within individual bays ensuring a cleaner workshop environment. Each cabin is robustly built using a steel double skinned, insulated construction which meets HSE regulations including the essential 30 minute fire resistance.

Contact our Spraybooth Manufacturers

For more information on the MultiBooth, or any other rapid vehicle repair equipment and services, get in touch with our friendly and experienced team. Give us a call on 01706 363 555, or e-mail us at sales@junair.co.uk.

Written by

Why is powder coating used in marine applications?

In the realm of marine protection, few solutions hold as much promise as marine grade powder coating. Developed to withstand the unforgiving conditions of our surrounding seas, these coatings offer a pragmatic approach to safeguarding metal surfaces from corrosion.  In this article, we’ll take a closer look at marine grade powder coating, exploring its practical […]

Read More

Considerations when buying a powder coating oven

For businesses operating in sectors like automotive and manufacturing, the prospect of establishing an in-house powder coating facility presents a compelling opportunity.

Read More

The Key to Uninterrupted Performance: Preventative Maintenance and Housekeeping for Paint Finishing Equipment

Junair is a specialist provider of paint finishing equipment including spraybooths and powder coating equipment in the UK. With a range of dedicated products and services designed to improve your paint finishing processes, Junair is here to help.  Paint finishing equipment includes powder coating equipment, different paint finishing equipment tools, drying and curing ovens and […]

Read More

Exploring the versatility of Power and Free Conveyors

Here’s an exciting glimpse into our latest conveyor project currently in the commissioning phase: a cutting-edge powder coating line that seamlessly combines automated and manual processes for the powder coating of security doors, where components can be loaded and unloaded in a stationary position along the conveyor line. To enhance quality control, we’ve incorporated five […]

Read More

Welcome to our team – Dan Parr

Welcoming Our Newest Team Member. Junair is thrilled to introduce our latest addition to the company, Dan Parr! Dan joins us as operations manager, bringing a wealth of expertise and a fresh perspective to our dynamic team. We couldn’t be happier to have him on board as we continue to grow and innovate. What is […]

Read More

The advantages of going green with your spray booth

Energy bills continue to be volatile across the UK and with government subsidies beginning to end, many companies are looking for ways to cut down on energy. If you combine this with the fact that many businesses are becoming more environmentally conscious for ethical and financial reasons, with grants on offer to make businesses greener, […]

Read More

Use of conveyors in powder coating facilities

Powder coating is a popular finishing process used in many industries, such as automotive, aerospace, and furniture manufacturing. It involves the application of a fine powder material onto a surface. This powder material  is then heated and cured to form a durable and attractive coating.  Powder coating facilities often face challenges when it comes to […]

Read More

How automated spray systems can save your business money

Automation is becoming more prevalent as technology advances and is one of the areas that is now increasingly accessible to businesses.  Having automatic processes in place has several advantages for businesses, it increases efficiency, improves accuracy and frees up employee time. However, one of the most underrated advantages of automation is how much money it […]

Read More

What is fusion bonded epoxy powder coating?

Fusion bonded epoxy powder coating (FBE) is a type of coating that is applied to the surface of a material as a dry powder. The powder is made up of small particles of epoxy resin and a hardening agent. The coating is applied to the surface of the material using a process called electrostatic spray […]

Read More
Blog

Read our latest news and insights from around the spray booth industry.

Find out more
Case Studies

Read about some of our latest client projects.

Find out more
Downloads

Take a look at some of our downloadable resources.

Find out more

If you have a new project that you would like some help with, call us on +44 1706 363 555 to speak to a member of our team about your requirements. We will take you through our project process step-by-step, whether you are redeveloping an existing site or building a new facility, Junair can help.