Paint Mixing Rooms & Gun Cleaning Rooms

Effective cross flow ventilation is provided from floor and bench level and connections for gun cleaners can be incorporated into the ventilation system. Air input is filtered to keep the mixing room free from contamination and a slam shut fire damper is fitted as standard to meet HSE requirements. Standard internal finish is in white however customers can specify half height or full height brushed stainless steel finish.

The most effective way to ventilate a paint mixing room is to capture fumes at source. The stainless steel bench is connected to the paint mixing room ventilation system and provides mixing operatives with the most efficient fume control system.

Bench dimensions

1250m long x 560mm deep x 900mm high.

For use within a paint mixing room, the Test Card Spray-out unit is manufactured from stainless steel and has a dedicated extraction fan and ductwork for independent operation. Small test card panels can be spray painted within the fume capture hood and the ventilation system ensures compliance with HSE legislation. Filters are installed in an easy change frame assembly for compliance with environmental legislation.

Junair supply and install gun cleaners sourced from high quality manufacturers including Redashe and UNIC. Fully automatic and manual options can be specified for water and solvent cleaning machines. Junair only supply equipment that has national service and spares support.

ATEX approved "EX" rated 3 KW electric heater with thermostat control used to protect paint products from damage during cold conditions. Normally set to stop the mixing room air temperature dropping below 10 deg C.

Galvanised grids set in steel trays to provide an anti slip floor which will contain any spillages and help maintain a clean environment. Solid inverted trays are used under immovable equipment allowing grids to be lifted for maintenance purposes.

For easier cleaning the internal walls of paint mixing and gun cleaning rooms can be lined in stainless steel. The personnel door is also manufactured with an internal stainless steel skin.