WheelCabin

WheelCabin is ideal for wheel repairs, off car panels and bumpers. Its compact size makes it easy to fit into most building layouts.

Key features for the Wheel Repairer;

• Filtered air intake keeps out workshop contamination
• Takes up minimal floor space
• Superb lighting
• Paint up to 4 wheels at a time
• Glazed doors provide superb visibility
• Economical to run
• Excellent air movement ensures effective over spray removal
• Meets HSE and Environmental Legislation
• Installed and operational within 48 hours

WheelBlast

The first blasting unit specifically designed for the preparation of wheels prior to painting. Hand preparation that can take an hour to complete is completed in just a few minutes with WheelBlast.

• Totally enclosed wheel blasting system
• Prepares wheels ready for painting
• Safe and easy to use
• Superb lighting
• Dust capture ventilation system
• Easy load door arrangement
• Turntable provides the ideal component position
• Loading trolley rolls forward for ease of loading
  

WheelSmart

Wheelsmart uses the extraction system from the Junair Smartair unit and creates a mobile wheel painting facility in the workshop that meets HSE and Environmental legislation.

• No spray booth time required to paint wheels
• Quick and easy to use
• Caters for all car wheel sizes

Ventilated Parts Preparation Bench

Ideal for the preparation of wheels and parts prior to painting. The ventilation and filtration system captures the dust particles at source and reduces contamination of the working environment.

• Extraction reduces workshop contamination
• Ventilation system works as a control measure for COSHH
• High efficiency cartridge filters
• Ideal height for working comfortably
• Requires only standard 13A plug socket
• Strong steel construction
• Optional rollers for easy product handling

Loading Bench

Steel bench with easy glide rollers for effortless handling of wheels between process areas. Benches are manufactured to suit the equipment layout.

Tyre Changer & Bead Breaker

A low cost solution for wheel repairs where tyres need to be taken off the rim or removed for the wheel completely.

WheelWasher

The unique wash method is world patented. Plastic granules and cold water are blasted under pressure through a flush pipe onto the rotating wheel. Tyres and rims are efficiently cleaned without the use of detergent or hot water. All you need is electricity and compressed air.

Closed system

The WheelWasher operates as a self-contained system and can be installed almost anywhere. The machine does not require a water supply or a drainage system and there is no need to remove the tyres.

Advanced electronics

The WheelWasher is pre-programmed with different wash cycles.

Facts

• Works with closed water system
• Dynamic flush pipe
• 4 wash programs
• Self adjusting wheel support
• Extra blow dry of the wheel
• Was programs for different sized wheels

WheelRack

Junair’s WheelRack provides the ideal work bench for preparing alloy wheels. The mobile bench can be easily moved around the workshop.

• Takes two wheels at a time
• Ideal height and angle for working comfortably
• Lightweight and mobile
• Wheels rotate easily on removable rollers
• Adjusts for any car wheel size in common use
• Robust, compact design

WheelBake

A purpose built convection oven for curing top coats on painted wheels.

• Cures 2 wheels at a time
• Curing time 15 to 30 minutes depending on material used
• Clean in operation
• Designed for use with compliant coatings
• Suitable for wheels with or without tyre fitted
• Easy load roller system
• Automatic temperature and time control
• Electric heating – no gas required

Ventilated Parts Prep Bench Mini

The more compact version of the full size preparation bench is ideal for use in smaller workshops/areas for the preparation of wheels and parts prior to painting. The ventilation and filtration system captures dust particles at source and reduces contamination of the working environment.

• Extraction reduces workshop contamination
• Compact design is ideal for use in smaller workshops/areas
• Ventilation system works as a control measure for COSHH
• High efficiency cartridge filters
• Ideal height for working comfortably
• Requires only standard 13A plug socket
• Lightweight shell construction
• Optional rollers for easy product handling