A guide to the correct spray booth temperature settings

There are many ways that you can increase productivity while maintaining spray booth efficiency, and perhaps one of the best is through the actual spray booth temperature settings. Understanding spray booth temperature settings will give you a foundation on which you can get the best results out of your system.

However, as no one job is the same, it’s more useful to look at the different bake profiles that we can offer. Our iSystem3 control panel allows you to automatically switch between profiles to reach a temperature that suits your product and process.

Spray booth temperatures available on the iSystem3

iSystem3 has the ability to set baking profiles that are variable to suit the paint system used and process required. For example, an initially lower temperature can be programmed to give a flash off period prior to then ramping up to the full bake temperature, then finally a cool down before switching off and the lights coming back on. All of this is pre-programmed so that the operator doesn’t have to think.

The temperature you choose depends on the job at hand, and they’re not in any way fixed. With the iSystem3, you can configure the exact length of time needed so you have completely custom controls.

As with most other Junair Spraybooths products, we give you customisation options to help make your processes as efficient and as comfortable as possible.

Get in touch for more information on the iSystem3

If you would like to learn more about the iSystem3 and its intelligent spray booth bake profile settings, simply get in touch with us here. In the meantime, please visit our guides to read more resources like this one. You may be interested in the following resources:

Written by

The extra care needed when spraying electric vehicles

There is the potential for automotive spray booths to struggle with paint repairs on electric vehicles. Electric vehicles cannot be finished in high-temperature paint booths due to the powerful battery. Auto manufacturers, including Audi, Lexus, Tesla, Toyota, and Volvo, have issued comments stating that electrical vehicle drying temperatures should not exceed 50 degrees centigrade (120 […]

Read More

Junair launch their electrically powered, carbon neutral spray booth

Monday 13th September 2021, Heywood, Lancashire Junair has always been the leading spray booth company when it comes to energy reduction, ultimately saving carbon emissions since 2002. It has won awards for both Junair EcoActive and the Junair 4 Series for energy reduction performance. As part of Junair’s long term commitment to the removal of […]

Read More

How robotics can save a business time and money

Despite a shrinking workforce, industrial manufacturers and aircraft producers have a significant need for faster lead times in order to stay competitive and satisfy operational challenges. They are sometimes pushed to do more with less. Introducing painting robots into your finishing process will save floor space, boost production, and enhance finish quality, all while allowing […]

Read More

The materials and processes used in plane construction

Have you ever wondered what goes into the manufacturing of the Boeing 787 you’re about to jump on for your next holiday across the big pond? Well, allow us to elaborate with our guide to the materials and processes used in plane construction.  At Junair, we provide paint finishing equipment solutions to an array of industries, […]

Read More

Junair announces the launch of their new logo

Jason Douglas and Angus Trenholme continue to lead the growth and direction of Junair Spraybooths Ltd following the recent retirement of two long standing Directors.  Angus and Jason wanted to mark this milestone, within both long established and new markets, so the decision has been taken to refresh Junair’s visual identity with a new logo. […]

Read More

Who needs a spray booth?

A spray booth is a regulated environment where spray paint can be applied to vehicles with control. The purpose of the spray booth is to boost productivity and improve paint quality while keeping employees safe from the hazardous materials used.  Without the use of a spray booth, spray painting alone can result in overspray; a […]

Read More

The health benefits of automated spray booths and how they can help your business reduce occupational health risks

Engineering and manufacturing companies have reaped the benefits of the advances in modern technology, particularly in regards to spray booths. It is not only the ingredients and chemical safety of the paints that have evolved, but the application from the spray booths themselves as well.  Not only are they required for your employees’ safety, but […]

Read More

The types of spray booth filter you should consider

Spray booth filters don’t come in one size fits all. There are many options which fall under two subtypes which include air extraction and air input. Air extraction filtration means filtering the air, removing the paint, varnish, glue, dust or other airborne particles before it leaves your booth. Air input filtration is the process of […]

Read More

Dismantling the fear-mongering around robotics overruling jobs

“Unexpected item in bagging area” – A pretty well-known phrase in today’s supermarkets, but prior to the last decade, this was a fairly new technology. As we moved into a more automated society, self-checkout was probably the first directly noticeable replacement of humans by robots. As the popularity grew, by 2013, there were 191,000 self-checkout […]

Read More
Blog

Read our latest news and insights from around the spray booth industry.

Find out more
Case Studies

Read about some of our latest client projects.

Find out more
Downloads

Take a look at some of our downloadable resources.

Find out more

If you have a new project that you would like some help with, call us on +44 1706 363 555 to speak to a member of our team about your requirements. We will take you through our project process step-by-step, whether you are redeveloping an existing site or building a new facility, Junair can help.