Painting a vehicle isn’t just all about choosing a colour to go for and then spraying this particular shade. Rather, the process is all about making sure that you’re in a spray booth that offers an exceptional level of lighting for the product that you wish to paint. So, with this in mind, we have compiled a guide that details everything you need to know about spray booth lighting in the UK. More specifically, we will take a look at the various spray booth lighting regulations that you have to abide by, and why it is so important to consider these if you want to achieve a high-quality finish for your vehicle.
There are several factors that you have to consider when choosing spray booth lighting fixtures for your body shop:
The lighting inside a spray booth should resemble natural light. Natural light is critical for you to be able to see your paint colour without the interruption of any tinting effects. So, when choosing the lighting for your spray booth, go for something that mimics the effects of natural lighting. Also, for you to see the texture of your vehicle, you will need to make sure that the lighting you go for is at the right level of brightness. Anything that is too dim or bright will make any tiny details go unnoticed. This will also make working in your bodyshop a little easier.
When it comes to spray booth lighting, consistency is key. By consistency, we mean that your booth’s lighting should be even throughout its entire interior. Any uneven lighting will show through shadows and small areas, and this will have the capacity to have a detrimental effect on the final finish of your vehicle. In the bodyshop environment, it could prove a little distracting or off-putting. Uniformity and consistency are key. Before you start the job, therefore, take the time to fully examine the level of lighting in your spray booth and whether it’s showing up in all areas.
Likewise, it’s important to give extreme consideration to the placement of your spray booth lighting fixtures. Your fixtures should be placed in areas that will provide optimal levels of light coverage to your vehicle that is being painted. Understandably, this is vital for bodyshops. Also, you’d want to make sure that you choose the right light fixture for the job. We recommend going for corner lights, as opposed to wall lights and ceiling lights. Corner lights themselves are so much easier to install and because they any be set up in any 90-degree corner, they offer high-quality all-around lighting for your vehicle.
Good lighting starts with a good light bulb. So, when it comes to choosing the right type of light bulb for your spray booth – don’t undervalue this! Let’s have a quick run-through of the light bulbs that you can use.
Spray booth LED lighting is a brilliant choice for your body shop booth. Not only are they beneficial for the environment due to their energy efficiency, but they also offer fantastic directional light emission. As well as this, an LED paint booth light has a fairly long lifespan, saving you time and money in the long run.
LED lights for spray booths can also provide a better colour rendering index (CRI), allowing for greater colour matching. Read more about the advantages of LED lighting.
Fluorescent lights are the most common types of lighting found in spray booths. Like spray booth LED lighting, these lights offer a long lifespan, low heat output and high energy efficiency. However, what differs from these lights to LED ones is that they are not directional, meaning they offer 360-degree lighting. This may be ideal in some cases, but if you want to light up a specific area in your booth, an LED light source may be the better option.
Explosion-proof lighting is recommended for use in laboratory applications and hazardous environments. Thus, this is why they are perfect for spray booths and the sometimes hazardous environment of bodyshops. Lights themselves can become a danger if they become too hot and interact with flammable solvents which can be commonly found in spray booths. Both LED and fluorescent proof lights are available in explosive-proof forms.
Note: To target optimal levels of lighting for your spray booth and bodyshop environment it is best to use a mixture of LED and fluorescent lights, as well as installing a variety of light fixtures.
On the search for new spray booth lights and accessories for your body shop? Check out Junair’s selection of spray booth lighting options. Our LED lights for spray booths are compliant with modern spray booth lighting requirements, offering excellent colour rendition and uniform lighting across your working area.
Our knowledgeable team can provide a free design and quotation service, saving you up to 60% in operating costs. To find out more about our spray booth LED lighting, contact us today.
Need advice from our team? We are always happy to help, you can reach us on 01706 363 555, or by email on sales@junair.co.uk.
Written by
In the realm of marine protection, few solutions hold as much promise as marine grade powder coating. Developed to withstand the unforgiving conditions of our surrounding seas, these coatings offer a pragmatic approach to safeguarding metal surfaces from corrosion. In this article, we’ll take a closer look at marine grade powder coating, exploring its practical […]
For businesses operating in sectors like automotive and manufacturing, the prospect of establishing an in-house powder coating facility presents a compelling opportunity.
Junair is a specialist provider of paint finishing equipment including spraybooths and powder coating equipment in the UK. With a range of dedicated products and services designed to improve your paint finishing processes, Junair is here to help. Paint finishing equipment includes powder coating equipment, different paint finishing equipment tools, drying and curing ovens and […]
Here’s an exciting glimpse into our latest conveyor project currently in the commissioning phase: a cutting-edge powder coating line that seamlessly combines automated and manual processes for the powder coating of security doors, where components can be loaded and unloaded in a stationary position along the conveyor line. To enhance quality control, we’ve incorporated five […]
Welcoming Our Newest Team Member. Junair is thrilled to introduce our latest addition to the company, Dan Parr! Dan joins us as operations manager, bringing a wealth of expertise and a fresh perspective to our dynamic team. We couldn’t be happier to have him on board as we continue to grow and innovate. What is […]
Energy bills continue to be volatile across the UK and with government subsidies beginning to end, many companies are looking for ways to cut down on energy. If you combine this with the fact that many businesses are becoming more environmentally conscious for ethical and financial reasons, with grants on offer to make businesses greener, […]
Powder coating is a popular finishing process used in many industries, such as automotive, aerospace, and furniture manufacturing. It involves the application of a fine powder material onto a surface. This powder material is then heated and cured to form a durable and attractive coating. Powder coating facilities often face challenges when it comes to […]
Automation is becoming more prevalent as technology advances and is one of the areas that is now increasingly accessible to businesses. Having automatic processes in place has several advantages for businesses, it increases efficiency, improves accuracy and frees up employee time. However, one of the most underrated advantages of automation is how much money it […]
Fusion bonded epoxy powder coating (FBE) is a type of coating that is applied to the surface of a material as a dry powder. The powder is made up of small particles of epoxy resin and a hardening agent. The coating is applied to the surface of the material using a process called electrostatic spray […]
Read our latest news and insights from around the spray booth industry.
Find out more
Read about some of our latest client projects.
Find out more
Take a look at some of our downloadable resources.
Find out more
If you have a new project that you would like some help with, call us on +44 1706 363 555 to speak to a member of our team about your requirements. We will take you through our project process step-by-step, whether you are redeveloping an existing site or building a new facility, Junair can help.
"*" indicates required fields