Give Your Spray Booth Productivity A Lift

New Access platforms now available from Junair Spraybooths

It’s time to put away your ladders and scaffolding for good. Now there’s a much faster, easier and more importantly, safer way to mask, paint and inspect commercial vehicles, PCVs or any large product. Junair Spraybooths are pleased to announce the UK launch of the Alfa-Lift range of pneumatically operated platforms.

Specially designed for use in spray booths and on painting lines, the new range includes the Alfa-Lift pneumatic platform. This has responsive, easy-to-use controls, located in the cage of the Junair Alfa-Lift, comprising three levers which allow the operator to send the cage in all three directions for maximum accessibility. A pneumatic cylinder with chain safety backup facilitates up and down movements. Left and right travel along the spray booth or object being painted is made possible by a pneumatic motor. In and out movements are driven by two pneumatic cylinders that move the cage to the central axis of the spray booth. Optimum productivity is ensured as operatives are not constantly running up and down ladders or static platforms.

In achieving optimum productivity, there has been no compromise on safety. The Junair Alfa-Lift complies with all safety and security regulations for both lifting platforms and spray booths. The product offers protection against leaks and pinching of the hoses, excess weight, collisions or obstacles on the ground, and unintentional opening of the access doors.

The Junair Spraybooth Alfa-Lift is mounted on rails that are fixed to the side walls of the spray booth. On the lower level, the guiding wheels slide on an L-shaped profile that is fixed to the floor, or on the wall so that the platform has no contact with the ground or grid floor. The cage of the platform is designed to carry one person plus equipment.

Find out more about Alfa-Lift platforms

To find out more about Alfa-Lift platforms or any other products available from Junair Spraybooths, please contact our sales team on 01706 363555

Written by

The extra care needed when spraying electric vehicles

There is the potential for automotive spray booths to struggle with paint repairs on electric vehicles. Electric vehicles cannot be finished in high-temperature paint booths due to the powerful battery. Auto manufacturers, including Audi, Lexus, Tesla, Toyota, and Volvo, have issued comments stating that electrical vehicle drying temperatures should not exceed 50 degrees centigrade (120 […]

Read More

Junair launch their electrically powered, carbon neutral spray booth

Monday 13th September 2021, Heywood, Lancashire Junair has always been the leading spray booth company when it comes to energy reduction, ultimately saving carbon emissions since 2002. It has won awards for both Junair EcoActive and the Junair 4 Series for energy reduction performance. As part of Junair’s long term commitment to the removal of […]

Read More

How robotics can save a business time and money

Despite a shrinking workforce, industrial manufacturers and aircraft producers have a significant need for faster lead times in order to stay competitive and satisfy operational challenges. They are sometimes pushed to do more with less. Introducing painting robots into your finishing process will save floor space, boost production, and enhance finish quality, all while allowing […]

Read More

The materials and processes used in plane construction

Have you ever wondered what goes into the manufacturing of the Boeing 787 you’re about to jump on for your next holiday across the big pond? Well, allow us to elaborate with our guide to the materials and processes used in plane construction.  At Junair, we provide paint finishing equipment solutions to an array of industries, […]

Read More

Junair announces the launch of their new logo

Jason Douglas and Angus Trenholme continue to lead the growth and direction of Junair Spraybooths Ltd following the recent retirement of two long standing Directors.  Angus and Jason wanted to mark this milestone, within both long established and new markets, so the decision has been taken to refresh Junair’s visual identity with a new logo. […]

Read More

Who needs a spray booth?

A spray booth is a regulated environment where spray paint can be applied to vehicles with control. The purpose of the spray booth is to boost productivity and improve paint quality while keeping employees safe from the hazardous materials used.  Without the use of a spray booth, spray painting alone can result in overspray; a […]

Read More

The health benefits of automated spray booths and how they can help your business reduce occupational health risks

Engineering and manufacturing companies have reaped the benefits of the advances in modern technology, particularly in regards to spray booths. It is not only the ingredients and chemical safety of the paints that have evolved, but the application from the spray booths themselves as well.  Not only are they required for your employees’ safety, but […]

Read More

The types of spray booth filter you should consider

Spray booth filters don’t come in one size fits all. There are many options which fall under two subtypes which include air extraction and air input. Air extraction filtration means filtering the air, removing the paint, varnish, glue, dust or other airborne particles before it leaves your booth. Air input filtration is the process of […]

Read More

Dismantling the fear-mongering around robotics overruling jobs

“Unexpected item in bagging area” – A pretty well-known phrase in today’s supermarkets, but prior to the last decade, this was a fairly new technology. As we moved into a more automated society, self-checkout was probably the first directly noticeable replacement of humans by robots. As the popularity grew, by 2013, there were 191,000 self-checkout […]

Read More

Read our latest news and insights from around the spray booth industry.

Find out more
Case Studies

Read about some of our latest client projects.

Find out more

Take a look at some of our downloadable resources.

Find out more

If you have a new project that you would like some help with, call us on +44 1706 363 555 to speak to a member of our team about your requirements. We will take you through our project process step-by-step, whether you are redeveloping an existing site or building a new facility, Junair can help.