Junair at the Advanced Engineering Show 2016

Junair at the Advanced Engineering Show

On the 2nd & 3rd of November Junair Spraybooths will once again be exhibiting at the Advanced Engineering Show which takes place at the NEC in Birmingham. The free to attend event offers access to over 700 exhibitors in the UK’s largest show of its kind.

As well as hosting a large open forum conference the Advanced Engineering Show also provides vital industry intelligence, supply chain opportunities and technology case studies from OEMs, top tier suppliers and leading industry organisations.

Visit Junair Spraybooths at the Advanced Engineering Show

Visit Junair at stand G41 to find out about our latest industry innovations and see the video showreel of Junair paint finishing solutions. Hear about some of our recent installations including;

  • A fully automated paint line at Airedale, comprising of a powered overhead conveyor, a high temperature curing oven and a fully automatic powder coating booth.
  • A state of the art manufacturing plant at Magna Hartlip, including a power and free overhead conveyor, a deionising area, an enclosed spraybooth and an adhesive pump / mix room.
  • A 31 meter spraybooth oven for Hitachi rail. Including Junair patented QADs, pneumatic personnel lifts and a paint mix room.

Junair Spraybooths will be one of over 700 exhibitors at the show which addresses the supply chain needs of various industries including aerospace, automotive, transport, civil engineering and more. As a leading manufacturer of spraybooth and paint finishing equipment, our specialists will be on hand to answer any questions you may have concerning any of our spraybooth solutions.

Contact Junair Spraybooths

If you haven’t already you can register to attend the show for free online now. If you are unable to attend the exhibition and would like further information on Junair Spraybooths contact us direct on 01706 363 555 or email the team on sales@junair.co.uk

Find out more about the UK’s leading spraybooth manufacturer.

Written by

The extra care needed when spraying electric vehicles

There is the potential for automotive spray booths to struggle with paint repairs on electric vehicles. Electric vehicles cannot be finished in high-temperature paint booths due to the powerful battery. Auto manufacturers, including Audi, Lexus, Tesla, Toyota, and Volvo, have issued comments stating that electrical vehicle drying temperatures should not exceed 50 degrees centigrade (120 […]

Read More

Junair launch their electrically powered, carbon neutral spray booth

Monday 13th September 2021, Heywood, Lancashire Junair has always been the leading spray booth company when it comes to energy reduction, ultimately saving carbon emissions since 2002. It has won awards for both Junair EcoActive and the Junair 4 Series for energy reduction performance. As part of Junair’s long term commitment to the removal of […]

Read More

How robotics can save a business time and money

Despite a shrinking workforce, industrial manufacturers and aircraft producers have a significant need for faster lead times in order to stay competitive and satisfy operational challenges. They are sometimes pushed to do more with less. Introducing painting robots into your finishing process will save floor space, boost production, and enhance finish quality, all while allowing […]

Read More

The materials and processes used in plane construction

Have you ever wondered what goes into the manufacturing of the Boeing 787 you’re about to jump on for your next holiday across the big pond? Well, allow us to elaborate with our guide to the materials and processes used in plane construction.  At Junair, we provide paint finishing equipment solutions to an array of industries, […]

Read More

Junair announces the launch of their new logo

Jason Douglas and Angus Trenholme continue to lead the growth and direction of Junair Spraybooths Ltd following the recent retirement of two long standing Directors.  Angus and Jason wanted to mark this milestone, within both long established and new markets, so the decision has been taken to refresh Junair’s visual identity with a new logo. […]

Read More

Who needs a spray booth?

A spray booth is a regulated environment where spray paint can be applied to vehicles with control. The purpose of the spray booth is to boost productivity and improve paint quality while keeping employees safe from the hazardous materials used.  Without the use of a spray booth, spray painting alone can result in overspray; a […]

Read More

The health benefits of automated spray booths and how they can help your business reduce occupational health risks

Engineering and manufacturing companies have reaped the benefits of the advances in modern technology, particularly in regards to spray booths. It is not only the ingredients and chemical safety of the paints that have evolved, but the application from the spray booths themselves as well.  Not only are they required for your employees’ safety, but […]

Read More

The types of spray booth filter you should consider

Spray booth filters don’t come in one size fits all. There are many options which fall under two subtypes which include air extraction and air input. Air extraction filtration means filtering the air, removing the paint, varnish, glue, dust or other airborne particles before it leaves your booth. Air input filtration is the process of […]

Read More

Dismantling the fear-mongering around robotics overruling jobs

“Unexpected item in bagging area” – A pretty well-known phrase in today’s supermarkets, but prior to the last decade, this was a fairly new technology. As we moved into a more automated society, self-checkout was probably the first directly noticeable replacement of humans by robots. As the popularity grew, by 2013, there were 191,000 self-checkout […]

Read More
Blog

Read our latest news and insights from around the spray booth industry.

Find out more
Case Studies

Read about some of our latest client projects.

Find out more
Downloads

Take a look at some of our downloadable resources.

Find out more

If you have a new project that you would like some help with, call us on +44 1706 363 555 to speak to a member of our team about your requirements. We will take you through our project process step-by-step, whether you are redeveloping an existing site or building a new facility, Junair can help.