Junair Spray Booths Complete Another Successful Installation

Junair Spray Booths have just completed another successful bodyshop lighting installation at Rye St Bishop Stortford.  The pre-installation of the lux levels were not up to modern standards and demands for a Grade A bodyshop. Post installation lux levels are a consistent 750 – 800 lux.  The lights that are fitted are the latest technology with motion and lux-sensing technology.  The lights dim or switch off if no movement detected in 15 minutes. Lights also dim or switch off if light [lux] levels rise sufficiently to meet the 750 lux minimum requirement – this is done fully automatically.

Junair Spray Booths Provide Immediate Improvements

Managing Director of Rye Street Bill Duffy said “We recognised that our lighting system was not up to 2013 requirements and having had Junair re-light our Broxbourne & Stanstead sites and being extremely pleased with that site we didn’t hesitate to have Junair do our Bishops Stortford site. The result was an immediate improvement in visibility especially at low level on the vehicles but also we now see far fewer errors in the paint prep as they have no excuses anymore! We also have seen a huge increase in morale on the shop floor and we see energy savings of c 60% plus. I would seriously recommend any Bodyshop needing lighting to look at this system”

Energy Savings with Junair Spray Booths

Grahame Kitchin, Sales and Marketing Director of Junair Spray Booths agrees “We are delighted to carry out another successful lighting installation for Rye St Group. Bill has outlined the benefits better than I can – except to say that, over say, a five year period, most of our lighting systems are self-financing and that is without allowing for the 8% per annum anticipated increases in energy costs. Installation is very straight-forward and quick and all surveys are entirely free of charge.”

For more information on all Junair Spray Booths services, don’t hesitate to get in touch with our helpful team by calling 01706 363 555 today.

Choose Junair for custom paint rooms in the UK.

Written by

Why is powder coating used in marine applications?

In the realm of marine protection, few solutions hold as much promise as marine grade powder coating. Developed to withstand the unforgiving conditions of our surrounding seas, these coatings offer a pragmatic approach to safeguarding metal surfaces from corrosion.  In this article, we’ll take a closer look at marine grade powder coating, exploring its practical […]

Read More

Considerations when buying a powder coating oven

For businesses operating in sectors like automotive and manufacturing, the prospect of establishing an in-house powder coating facility presents a compelling opportunity.

Read More

The Key to Uninterrupted Performance: Preventative Maintenance and Housekeeping for Paint Finishing Equipment

Junair is a specialist provider of paint finishing equipment including spraybooths and powder coating equipment in the UK. With a range of dedicated products and services designed to improve your paint finishing processes, Junair is here to help.  Paint finishing equipment includes powder coating equipment, different paint finishing equipment tools, drying and curing ovens and […]

Read More

Exploring the versatility of Power and Free Conveyors

Here’s an exciting glimpse into our latest conveyor project currently in the commissioning phase: a cutting-edge powder coating line that seamlessly combines automated and manual processes for the powder coating of security doors, where components can be loaded and unloaded in a stationary position along the conveyor line. To enhance quality control, we’ve incorporated five […]

Read More

Welcome to our team – Dan Parr

Welcoming Our Newest Team Member. Junair is thrilled to introduce our latest addition to the company, Dan Parr! Dan joins us as operations manager, bringing a wealth of expertise and a fresh perspective to our dynamic team. We couldn’t be happier to have him on board as we continue to grow and innovate. What is […]

Read More

The advantages of going green with your spray booth

Energy bills continue to be volatile across the UK and with government subsidies beginning to end, many companies are looking for ways to cut down on energy. If you combine this with the fact that many businesses are becoming more environmentally conscious for ethical and financial reasons, with grants on offer to make businesses greener, […]

Read More

Use of conveyors in powder coating facilities

Powder coating is a popular finishing process used in many industries, such as automotive, aerospace, and furniture manufacturing. It involves the application of a fine powder material onto a surface. This powder material  is then heated and cured to form a durable and attractive coating.  Powder coating facilities often face challenges when it comes to […]

Read More

How automated spray systems can save your business money

Automation is becoming more prevalent as technology advances and is one of the areas that is now increasingly accessible to businesses.  Having automatic processes in place has several advantages for businesses, it increases efficiency, improves accuracy and frees up employee time. However, one of the most underrated advantages of automation is how much money it […]

Read More

What is fusion bonded epoxy powder coating?

Fusion bonded epoxy powder coating (FBE) is a type of coating that is applied to the surface of a material as a dry powder. The powder is made up of small particles of epoxy resin and a hardening agent. The coating is applied to the surface of the material using a process called electrostatic spray […]

Read More
Blog

Read our latest news and insights from around the spray booth industry.

Find out more
Case Studies

Read about some of our latest client projects.

Find out more
Downloads

Take a look at some of our downloadable resources.

Find out more

If you have a new project that you would like some help with, call us on +44 1706 363 555 to speak to a member of our team about your requirements. We will take you through our project process step-by-step, whether you are redeveloping an existing site or building a new facility, Junair can help.