Junair are looking to hire a full time wiring technician. Job details are below, if you would like to apply please email your CV to sales@junair.co.uk referencing ‘Wiring Technical Vacancy’ in the subject line.
Job Title: Wiring Technician (with Development Opportunity to become a Commissioning Engineer)
Location: UK with occasional overseas work
Department: Electrical / Automation
Reports To: Controls & Commissioning Manager
Type: Full-time
Overview:
We are seeking a motivated and reliable individual to join our team as a Wiring Technician, responsible for the electrical wiring of motors, fans, E-stop circuits, sensors, and associated components used in our paint refinishing booths and automated conveyor systems.
This role presents an excellent opportunity for a 1st or 2nd-year electrical apprentice, or someone with basic electrical experience and a strong interest in industrial automation. The successful candidate will be trained with a view to progressing into a Commissioning Engineer role, supporting system start-up, fault-finding, and control logic verification both in-house and on customer sites.
Key Responsibilities:
• Wire motors, fans, limit switches, proximity sensors, E-stops, contactors, and relays in accordance with electrical schematics.
• Route, terminate, and label cables and wiring inside electrical panels and field installations.
• Assist with the build, modification, and testing of control panels and junction boxes.
• Carry out tests on installed wiring.
• Follow all health and safety procedures and adhere to relevant electrical standards.
• Support commissioning engineers with basic functional checks, signal testing, and equipment calibration.
• Maintain accurate records of work carried out and materials used.
• Willingness to travel to customer sites with overnight stays for installation and commissioning support (once trained). Expected a minimum of three nights per week working away from home on average.
Requirements:
• Basic understanding of electrical systems and wiring techniques.
• Ability to read and interpret electrical schematics and wiring diagrams (training will be provided if needed).
• Practical experience with hand tools, crimpers, multimeters, etc.
• Good problem-solving skills and a willingness to learn.
• Strong attention to detail and ability to follow instructions.
• Full UK driving licence preferred (or working towards).
• Right to work in the UK.
Desirable (but not essential):
• Enrolled in or completed an electrical apprenticeship or NVQ Level 2/3 in Electrical Installation.
• Familiarity with control panels, VSDs (e.g., LS Electric, Siemens), and automation systems.
• Interest or background in industrial control, PLCs, or commissioning work.
Development Path:
This role is designed with a clear progression path in mind. Suitable candidates will be supported through in-house and external training, shadowing experienced engineers, and gradually taking on more responsibility in the commissioning phase. This includes:
• Basic PLC and HMI programming
• Field device calibration
• Control system troubleshooting
• On-site commissioning and customer support
Written by
Junair are looking to hire a full time wiring technician. Job details are below, if you would like to apply please email your CV to sales@junair.co.uk referencing ‘Wiring Technical Vacancy’ in the subject line. Job Title: Wiring Technician (with Development Opportunity to become a Commissioning Engineer)Location: UK with occasional overseas workDepartment: Electrical / AutomationReports To: […]
The position of Project Planner has become available at Junair Spraybooths at our offices in Heywood, Manchester.We require someone who can plan multi-faceted projects from beginning to end and monitor progress through design, manufacturing, purchasing, onsite build, commissioning and sign off. Working with measurement systems to gauge continuous improvements.This will involve detailed communications and discussions […]
In the realm of marine protection, few solutions hold as much promise as marine grade powder coating. Developed to withstand the unforgiving conditions of our surrounding seas, these coatings offer a pragmatic approach to safeguarding metal surfaces from corrosion. In this article, we’ll take a closer look at marine grade powder coating, exploring its practical […]
For businesses operating in sectors like automotive and manufacturing, the prospect of establishing an in-house powder coating facility presents a compelling opportunity.
Junair is a specialist provider of paint finishing equipment including spraybooths and powder coating equipment in the UK. With a range of dedicated products and services designed to improve your paint finishing processes, Junair is here to help. Paint finishing equipment includes powder coating equipment, different paint finishing equipment tools, drying and curing ovens and […]
Here’s an exciting glimpse into our latest conveyor project currently in the commissioning phase: a cutting-edge powder coating line that seamlessly combines automated and manual processes for the powder coating of security doors, where components can be loaded and unloaded in a stationary position along the conveyor line. To enhance quality control, we’ve incorporated five […]
Welcoming Our Newest Team Member. Junair is thrilled to introduce our latest addition to the company, Dan Parr! Dan joins us as operations manager, bringing a wealth of expertise and a fresh perspective to our dynamic team. We couldn’t be happier to have him on board as we continue to grow and innovate. What is […]
Energy bills continue to be volatile across the UK and with government subsidies beginning to end, many companies are looking for ways to cut down on energy. If you combine this with the fact that many businesses are becoming more environmentally conscious for ethical and financial reasons, with grants on offer to make businesses greener, […]
Powder coating is a popular finishing process used in many industries, such as automotive, aerospace, and furniture manufacturing. It involves the application of a fine powder material onto a surface. This powder material is then heated and cured to form a durable and attractive coating. Powder coating facilities often face challenges when it comes to […]
Read our latest news and insights from around the spray booth industry.
Find out more
Read about some of our latest client projects.
Find out more
Take a look at some of our downloadable resources.
Find out more
If you have a new project that you would like some help with, call us on +44 1706 363 555 to speak to a member of our team about your requirements. We will take you through our project process step-by-step, whether you are redeveloping an existing site or building a new facility, Junair can help.
"*" indicates required fields