James Alpe Repair Centre choose our Spray Booth Equipment

Lancashire based Accident Repair Centre James Alpe have recently installed a four-bay Junair MultiBooth.

With over 30 years experience, James Alpe are in a prime position to understand the ever-changing requirements of its customers. James Alpe approached Junair for a solution to their customers’ requirements, and the MultiBooth was the obvious option. Key to key time, quality and cost always feature highly in customer demands and now with the new MultiBooth from Junair, James Alpe are able to deliver on all of these requirements.

Key to Key time

The MultiBooth saves time by eliminating the need for moving the vehicles around the bodyshop. The vehicles are prepared, sprayed and baked in situ, with no movement required. The damaged vehicle is driven into the cabin and the refinished vehicle is driven out. It doesn’t matter in which order the vehicles become ready for the paint process, the easy glide door simply slides along to convert the relevant cabin into a fully operational low bake spraybooth oven.

Quality

As the MultiBooth is a fully extracted spraybooth oven, the quality of the finish is the same you would expect from any other Junair spraybooth. As with all Junair products, the MultiBooth complies with all relevant HSE regulations. As MultiBooth is a conventional spraybooth oven, all compliant paint types can be used, so no compromise on paint systems is required.

Costs

The MultiBooth shares one air handling plant across all its cabins, meaning that the initial capital outlay is significantly less than you would expect. In addition to that, the speed of the process sees a higher throughput of vehicles in the workshop meaning that costs can be kept to a minimum. The booth runs with the energy efficiency that is synonymous with the Junair name, meaning the bodyshop energy bills are also kept as low as possible.

James Alpe commented, “We have been operating an express repair service for our insurance work providers and private clients for a number of years. This function was run by a dedicated team of four technicians. With the new MultiBooth, the same four operatives are now able to work far more efficiently and with a much faster turnaround time, further enhancing our express 24 hour repair facility.

Each MultiBooth cabin is a combination preparation area and a full low bake spraybooth, allowing multiple vehicles to be repaired in a clean controlled and safe environment. Overspray is contained within individual bays ensuring a cleaner workshop environment. Each cabin is robustly built using a steel double skinned, insulated construction which meets HSE regulations including the essential 30 minute fire resistance.

Contact our Spraybooth Manufacturers

For more information on the MultiBooth, or any other rapid vehicle repair equipment and services, get in touch with our friendly and experienced team. Give us a call on 01706 363 555, or e-mail us at sales@junair.co.uk.

Written by

Junair launch their electrically powered, carbon neutral spray booth

Monday 13th September 2021, Heywood, Lancashire Junair has always been the leading spray booth company when it comes to energy reduction, ultimately saving carbon emissions since 2002. It has won awards for both Junair EcoActive and the Junair 4 Series for energy reduction performance. As part of Junair’s long term commitment to the removal of […]

Read More

How robotics can save a business time and money

Despite a shrinking workforce, industrial manufacturers and aircraft producers have a significant need for faster lead times in order to stay competitive and satisfy operational challenges. They are sometimes pushed to do more with less. Introducing painting robots into your finishing process will save floor space, boost production, and enhance finish quality, all while allowing […]

Read More

The materials and processes used in plane construction

Have you ever wondered what goes into the manufacturing of the Boeing 787 you’re about to jump on for your next holiday across the big pond? Well, allow us to elaborate with our guide to the materials and processes used in plane construction.  At Junair, we provide paint finishing equipment solutions to an array of industries, […]

Read More

Junair announces the launch of their new logo

Jason Douglas and Angus Trenholme continue to lead the growth and direction of Junair Spraybooths Ltd following the recent retirement of two long standing Directors.  Angus and Jason wanted to mark this milestone, within both long established and new markets, so the decision has been taken to refresh Junair’s visual identity with a new logo. […]

Read More

Who needs a spray booth?

A spray booth is a regulated environment where spray paint can be applied to vehicles with control. The purpose of the spray booth is to boost productivity and improve paint quality while keeping employees safe from the hazardous materials used.  Without the use of a spray booth, spray painting alone can result in overspray; a […]

Read More

The health benefits of automated spray booths and how they can help your business reduce occupational health risks

Engineering and manufacturing companies have reaped the benefits of the advances in modern technology, particularly in regards to spray booths. It is not only the ingredients and chemical safety of the paints that have evolved, but the application from the spray booths themselves as well.  Not only are they required for your employees’ safety, but […]

Read More

The types of spray booth filter you should consider

Spray booth filters don’t come in one size fits all. There are many options which fall under two subtypes which include air extraction and air input. Air extraction filtration means filtering the air, removing the paint, varnish, glue, dust or other airborne particles before it leaves your booth. Air input filtration is the process of […]

Read More

Dismantling the fear-mongering around robotics overruling jobs

“Unexpected item in bagging area” – A pretty well-known phrase in today’s supermarkets, but prior to the last decade, this was a fairly new technology. As we moved into a more automated society, self-checkout was probably the first directly noticeable replacement of humans by robots. As the popularity grew, by 2013, there were 191,000 self-checkout […]

Read More

Common causes of contamination in spray booths

When it comes to automotive refinishing, contamination is a common issue that can significantly impact the quality of your work. However, contamination is easy to resolve if you know what to look out for. From dust and debris to poor spray booth preparation, we can help you achieve a quality finish on your next spray […]

Read More
Blog

Read our latest news and insights from around the spray booth industry.

Find out more
Case Studies

Read about some of our latest client projects.

Find out more
Downloads

Take a look at some of our downloadable resources.

Find out more

If you have a new project that you would like some help with, call us on +44 1706 363 555 to speak to a member of our team about your requirements. We will take you through our project process step-by-step, whether you are redeveloping an existing site or building a new facility, Junair can help.