Energy Saving Spraybooths for Peter Cooper Motor Group

Energy saving spraybooths

Peter Cooper Cars are an independently owned Volkswagen group based along the South Coast. Their fully approved paint and body centre is not only authorised to repair Volkswagen vehicles but Audi, Seat and Skoda as well, meaning the highest standard of repair work is demanded. Peter Cooper had an 18 year old Junair spray booth which has served them well. Having experience of Junair and as quality of finish is key, Peter Cooper group once again turned to Junair for their spraybooths.

Peter Cooper replaced both of their spray booths in 2 phases to ensure the body shop was still able to function whilst the works were completed. The first phase was the installation of a 1 Series spraybooth with a rear chest extraction. The second phase included the installation of a 3 Series fully down draught spraybooth with a LEVAC floor. The LEVAC floor allows a full extracted, balanced floor without the need for excavation, a small 140mm unobtrusive ramp allows the easy loading and unloading of the spraybooth.

Energy Saving Features

Both spraybooths were fitted with key energy saving extras including fuel saver mode, variable speed drives, LED lighting and QADs which when used in combination can save up to 70% of fuel costs making the system self-financing.

Automatic Fuel saver mode automatically changes the air handling plant from full fresh air intake to re-circulation during idle and flash off modes, substantially reducing the air heating costs.

The fully automatic variable speed drive was fitted to reduce the airflow through the cabin when it is being loaded or standing idle leading to a reduction in fuel costs. As the system is fully automatic, operator selection is not required and no human error can occur, so the energy savings are guaranteed.

Both spray booths are illuminated using an LED lighting system to ensure sustained uniformity of light and colour. Junair LED lighting provides a bright clean, shadow free light that represents natural daylight, ensuring operators have the optimum environment for an accurate colour rendition and a flaw free finish. Discover the benefits of bodyshop LED lighting.

Junair patented QADs have been installed in both of the booths ensuring that the cure time is significantly reduced, this offers the benefit of being environmentally friendly and energy efficient, saving costs in the process. QADs are an auxiliary drying system moving air from the corners of the booth to agitate the airflow around the component, speeding up the drying time.

Junair proud to be of service for 18 years

Steven Wood, Sales Manager at Junair Spraybooths commented “Peter Cooper cars are very quality conscious, as a family run business with a reputation to uphold its imperative that they have the best kit possible to complete the job to the best possible standards. Their 18 year old Junair spraybooth has served them well providing consistent, reliable, quality over the years, which is why they turned to us for the replacements. ”

Ivan Dodman, Bodyshop Manager at Peter Cooper Motor Group commented “The decision to invest in two new ovens has transformed our paint shop, not only have they helped improve upon our high standard in the finish of our paintwork but also our increased our throughput. The spray booth’s energy saving features have reduced noise levels in the workshop and we’re confident that we have a business ready for the future.

Junair Spraybooths are a leading spraybooth and paint finishing manufacturer. Our innovative designs can be tailored to offer solutions which increase productivity and energy efficiency whilst saving time and money. To find out more about how Junair can help you email us on sales@junair.co.uk or call the experienced team on 01706 363 555.

Written by

Direct Line Group install SiriusLED

With vehicles coming and going all day long, body shop lighting issues are the last thing you need. A problem that Dean Kelly, Technical Services Manager for the Direct Line Group knows all too well. The Solution Direct Line Group have recently acquired the Junair Sirius LED system for their Weybridge Bodyshop, and have installed […]

Read More

Maximum impact for Alan Reed Ltd with the SiriusLED lighting system

Need some help designing your new build workshop? Not sure what lighting system to use? Accident repair company, Alan Reed Ltd in Shildon, County Durham have recently integrated Junair’s new SiriusLED lighting system into their new build workshop facility and have been over the moon with the results. Being tasked with the total fit out […]

Read More

Junair helps H Samson (Bolton) Ltd drive output and lower running costs

    The accident repair, servicing and MOT experts H Samson (Bolton) Ltd got in touch with the team at Junair Spraybooths to discuss potential work on upgrading their existing setup. Suffice to say that we were excited to get started. Here’s how the project happened… Who are H Samson (Bolton) Ltd? Established for over […]

Read More

Junair proudly supply Liquidwrap Ltd. with one of our high quality Spraybooth ovens!

    Recently, the spraybooth and paint finishing experts here at Junair were contacted by the team at Liquidwrap Ltd. after they had moved into a new head office in London, and required our assistance with the transition. In our latest post, we talk through exactly how we were able to help Liquidwrap and also […]

Read More

World-class marine outfitter purchases marine spray booth systems from Junair

Trimline Group are global experts in the interior refurbishment of marine vehicles with prestigious clients such as Cunard, Royal Navy and Princess Cruises. The quality of the finish they provide is paramount to their ongoing success, and as the refinishing area is part of the factory tour for new and prospective clients, the aesthetics of […]

Read More

Body Shop Spray Booth Installed

Award-winning body shop chain, AW Repair Group, chosen Junair once again to replace existing paintbooth operations. Having installed a Junair 3 Series at their last two new ventures, Junair Spraybooths have seen an increase in throughput and decrease in costs as they embarked on a complete strategic replacement programme. Quality Spraybooths for Body Shops The Sleaford, […]

Read More

Paul Cox Panel and Paint relocate to Wellingborough

Paul Cox Panel and Paint are an accident repair centre based in Wellingborough, having recently relocated from Northampton. Established in 2003, their aim is to carry out high quality repairs to all car body types. Recognising a niche in the market, Paul Cox have now also opened a specialist coatings department, enabling them to paint […]

Read More

Junair install new spraybooth equipment for NCR Bodyshops

NCR Bodyshops operate a group of car body repair shops in the south of England, offering the very best in vehicle care since 1986. After recognising a need for more repairers in the area, the business opened a new site in Swindon. Junair is a provider of paint finishing equipment for a variety of sectors, […]

Read More

New Paintshop for Protek Bathgate Ltd

Protek Bathgate Ltd is a family run accident repair business with over 40 years’ experience. Founded in 1974, it has gained the recommendations of several leading insurance companies and also the BSI Kitemark accreditation, it’s clear Protek are focused on the highest standard of body repair and the highest standard of paint finishes, so when […]

Read More
Blog

Read our latest news and insights from around the spray booth industry.

Find out more
Case Studies

Read about some of our latest client projects.

Find out more
Downloads

Take a look at some of our downloadable resources.

Find out more

If you have a new project that you would like some help with, call us on +44 1706 363 555 to speak to a member of our team about your requirements. We will take you through our project process step-by-step, whether you are redeveloping an existing site or building a new facility, Junair can help.